New Hampshire CDL and Trucking Guide
To get a CDL in New Hampshire, you pass the Division of Motor Vehicles knowledge tests for a commercial driver learner permit, wait at least 14 days, then pass a three-part skills test at one of the DMV's five CDL test sites. If it is your first Class A or Class B CDL, federal rules also require entry-level driver training (ELDT) from a provider on FMCSA's Training Provider Registry before the skills test.
Last verified:
Get the free New Hampshire CDL cheat sheet → One printable page, with your permit and license costs if you want them.
Getting a CDL in New Hampshire
| Licensing agency | The Division of Motor Vehicles (DMV), part of the New Hampshire Department of Safety, issues commercial driver learner permits and CDLs.[1] |
|---|---|
| Official CDL manual | New Hampshire Commercial Driver's License Manual (PDF), plus the manual supplement for the modernized skills test (PDF), which covers the vehicle inspection and basic vehicle control tests. The DMV says to study both. If those links move, use the DMV's commercial driver licenses page.[2][3][1] |
| Minimum age | 18 for a commercial driver learner permit. A New Hampshire CDL holder under 21 gets a K restriction, which means driving a commercial vehicle inside New Hampshire only. You must be 21 to drive a commercial vehicle across state lines.[4][5][6] |
| What you need for the permit | A valid New Hampshire driver license, a valid medical card on file with the DMV, a completed CDL application, the fees, and a passing score on each knowledge test that applies. You book an appointment for the permit knowledge test.[4][1] |
| Wait after the permit | The road test can be scheduled no sooner than 14 days after the permit is issued.[4] |
| How long the permit lasts | 180 days. It can be renewed one time, as long as you passed the knowledge tests within the past year.[4] |
| Skills test | Three segments, taken in this order: vehicle inspection, basic vehicle control and on-road driving. You must pass each one before moving to the next.[2] |
| Where skills tests are given | Five DMV test sites: Concord, Durham, Lebanon, Nashua and Twin Mountain. Call the DMV at (603) 227-4000 to schedule.[7] |
| If you fail the road test | You have to go to a DMV office in person to schedule another one, and the fee is $20.[7] |
| Fees | $60 for a Class A, B or C CDL, $20 more for the learner's permit, and $10 for each endorsement.[8] |
New Hampshire CDL permit and license fees
These are the fees the New Hampshire DMV publishes for a commercial learner's permit, the tests and a CDL. Each row says who pays it. We list a fee only where the state names it and gives the amount. Checked October 5, 2026.
| Fee | Amount | Who pays it |
|---|---|---|
| Learner's permit and knowledge tests | ||
| Commercial learner's permitThe DMV lists this fee as in addition to the CDL fee for your class. | $20.00[9] | A first CDL |
| License | ||
| CDL, Class A, B or CState law sets $60 for each original commercial driver license and examination. A license expires on your birthday in the fifth year after it is issued. | $60.00[10] | A first CDL |
| Endorsement$10 each for H, N, P, S and T. State law sets $10 for each commercial vehicle endorsement. The DMV says a driver with a valid New Hampshire CDL can add endorsements with a CDL application. | $10.00 for each endorsement[9] | A first CDL and a CDL holder adding an endorsement |
Not in the table for a first CDL, because we could not confirm the amount from the New Hampshire DMV:
- The federal HazMat background check (TSA fingerprint clearance), if you add HazMat
Not in the table for a driver who already holds a CDL, because we could not confirm the amount from the New Hampshire DMV:
- All fees for moving up a class (the DMV does not publish what the upgraded license costs or say whether the $20 learner's permit is required)
- The $20 learner's permit, if the DMV requires one for the endorsement you add
- Any fee for a new license card after adding an endorsement
- The federal HazMat background check (TSA fingerprint clearance), if you add HazMat
Renewal: A commercial driver license renewal is $60, plus $10 to renew each endorsement. A license expires on your birthday in the fifth year after it is issued.[10]
- If you fail the original road test, you must go to a DMV office in person to schedule another road test for a fee of $20.[11]
- State law sets $20 for each commercial driver license reexamination in a one-year period, and $10 to remove a restriction.[10]
- The DMV form says the HazMat endorsement requires a TSA fingerprint clearance. It gives no cost for that clearance.[12]
- No fee is refunded once an examination has been taken or a license issued, except as state law provides.[10]
- State law sets one $60 fee for each original commercial driver license, and the new license expires on your birthday in the fifth year after it is issued. No source opened lists a credit or a prorated fee for time left on the license you hold now.[10]
- A Class B or Class C CDL holder moving up a class must pass the knowledge tests for the new class and then the road skills test.[13]
- The DMV says a commercial driver learner permit ($20 by state law) is provided to people applying for a CDL and to people who hold a CDL and want to upgrade or remove a restriction. It does not say the permit is required for every upgrade, so it is not added to a CDL holder's total here.[14]
- To add endorsements to a New Hampshire CDL, the DMV says you must pass a vision test and the knowledge test for the endorsement, and a road skills test if one applies.[15]
Fees change. Confirm your total with the New Hampshire DMV before you go. The New Hampshire DMV sets these fees; ELDT.Courses does not collect them.
Want them added up for your class and endorsements? Get the free New Hampshire CDL cheat sheet with your costs.
ELDT in New Hampshire: what has to be done before you test
Entry-level driver training (ELDT) is a federal rule, so it works the same in New Hampshire as in every other state. If you are getting a Class A or Class B CDL for the first time, upgrading to a Class A or B, or adding a passenger (P), school bus (S) or hazardous materials (H) endorsement for the first time, you have to complete training with a provider listed on FMCSA's Training Provider Registry (TPR).[16]
The state cannot give you the skills test for a Class A or B CDL or a P or S endorsement, or the knowledge test for the H endorsement, until that training is on record.[17] Theory can be done online: the federal definition of theory instruction includes online training.[18] Except for the HazMat endorsement, the theory and behind-the-wheel parts have to be finished within one year of each other.[19]
ELDT.Courses is an FMCSA-registered training provider listed on the TPR. These are the online theory courses that match each license or endorsement:
| What you are going for | ELDT theory must be done before | Online theory course |
|---|---|---|
| First Class A CDL | The skills test | Class A CDL theory ($129) |
| First Class B CDL | The skills test | Class B CDL theory ($109) |
| Upgrade from Class B to Class A | The skills test | Class B to Class A upgrade theory ($99) |
| HazMat (H) endorsement | The HazMat knowledge test | HazMat endorsement theory ($95) |
| Passenger (P) endorsement | The skills test | Passenger endorsement theory ($95) |
| School bus (S) endorsement | The skills test | School bus endorsement theory ($95) |
New Hampshire follows the federal rule. The DMV's CDL page says applicants must finish entry-level driver training before they can schedule a skills test, and that a skills test can only be scheduled by someone who holds a valid CDL permit and has completed ELDT. For a list of trainers it sends you to FMCSA's Training Provider Registry.[1]
The tank (N) and doubles and triples (T) endorsements are not on the federal ELDT list, so they only take a knowledge test.[16] We have low-cost prep for those too: tank endorsement test prep ($35) and doubles and triples test prep ($35).
Still working on your permit? Use the free CDL practice tests, or the $35 permit prep courses for General Knowledge, Air Brakes and Combination Vehicles.
Truck driving jobs and pay in New Hampshire
| Drivers employed (May 2025) | 6,960[20] |
|---|---|
| Median pay (May 2025) | $60,280 a year, or $28.98 an hour[20] |
| Average pay (May 2025) | $60,600 a year, or $29.13 an hour[20] |
| Projected jobs, 2024 to 2034 | 7,160 in 2024, growing to 7,530 in 2034 (up 5.2%)[21] |
| Projected openings each year, 2024 to 2034 | About 770 a year, counting new jobs and replacements[21] |
The wage figures are from the federal Occupational Employment and Wage Statistics survey. The projections come from New Hampshire's own long-term forecast, published through Projections Central. The two sources give different job totals.
Truck rules on New Hampshire roads
Size and weight limits
| Width | 102 inches (8 feet 6 inches), including the load[22] |
|---|---|
| Height | 13 feet 6 inches, including the load[23] |
| Single vehicle length | 45 feet for a single unit vehicle or a bus, including front and rear bumpers[24] |
| Semitrailer length | 53 feet. A semitrailer longer than 48 feet must have no more than 41 feet from the kingpin to the center of the rear axle or the midpoint of the tandem, must have a rear-end protection device, and must stay on Interstate and defense highways and other highways the commissioner has designated. It can leave those highways for up to one mile to reach terminals, pickup and delivery points, fuel, repairs, food or rest.[24] |
| Doubles | Each trailer up to 28 feet[24] |
| Gross weight | 80,000 pounds for a tractor and semitrailer with 5 or more axles, or a tractor with more than one trailer, with axle groups limited by the bridge formula. That number includes all enforcement tolerances. Smaller trucks have lower limits, such as 33,400 pounds on 2 axles.[25][26] |
| Axles on Interstates, over 73,280 pounds gross | 20,000 pounds per axle on axles more than 8 feet apart, and 17,000 pounds per axle on axles 8 feet apart or less. Two tandems can carry 34,000 pounds each when the first and last axles are at least 36 feet apart.[25] |
| Axles, 73,280 pounds gross or less | 22,400 pounds per axle on axles 10 feet or more apart, and 18,000 pounds per axle on axles less than 10 feet apart. On a tractor and semitrailer with 5 or more axles, a tandem can carry 36,000 pounds.[25][26] |
| Tolerance off the Interstates | On roads that are not part of the Interstate and defense highway system, the law tells police to allow 5 percent over the limits.[26] |
| Higher weights with state certification | A truck certified by the Department of Safety for added weight ($105 a year, plus an added registration) can run heavier on non-Interstate roads, up to 99,000 pounds for a tractor with one or more trailers. For as long as the federal exemption allowing up to 99,000 pounds on Interstates 89, 93 and 95 lasts, the law says a truck on those routes can go over the Interstate limits only if it has that certification and has paid the fee, and not on sections posted for lower weights.[27][28][25] |
| Auxiliary power unit | A truck with a working auxiliary power or idle reduction unit can be allowed up to 550 extra pounds. The driver has to carry written certification of the unit's weight.[29] |
Longer combination vehicles
New Hampshire has no grandfathered longer combinations on the federal list. Appendix C to the federal size and weight rule shows "NO" for New Hampshire in every column.[30] State law also bans triple trailer trucks on New Hampshire roads.[31]
Truck speed limits
New Hampshire's speed law, RSA 265:60, sets its limits for "any vehicle." The limit is 65 mph on the Interstate system and on the central and eastern New Hampshire turnpikes where they are divided highways of four or more lanes, and 70 mph on Interstate 93 from mile marker 45 to the Vermont border. It is 30 mph in a business or urban residence district, 35 mph in a rural residence district, and 55 mph in other locations. The law allows these limits to be altered under a separate section, RSA 265:62.[32]
At toll plazas, a vehicle with a transponder is limited to 25 mph through a toll booth or gate. In an open road tolling lane the top speed is 65 mph. In a work zone the limit is at least 10 mph below the usual posted limit.[32]
Seasonal and posted roads
The New Hampshire Department of Transportation (NHDOT) posts seasonal weight limits on sections of state highways. Its permit office calls them spring thaw restrictions and annual spring road postings.[33] On a posted section the most you can weigh is 30,000 pounds gross, or 300 pounds for each inch of tire width touching the road, whichever is less.[34]
State law lets heating fuel delivery trucks, trucks delivering processed milk products, trucks carrying sap for maple syrup, and septic pumper trucks run on posted roads if the NHDOT district engineer approves.[35] NHDOT lists the posted roads on New England 511, under Trucking, New Hampshire, Seasonal Posting.[34]
Idling
New Hampshire's air rule Env-A 1100 limits how long a motor vehicle can idle, and the limit depends on the temperature. Above 32 degrees Fahrenheit, it is no more than 5 minutes in a row in any 60-minute period. From minus 10 up to 32 degrees, it is 15 minutes. Below minus 10 degrees there is no limit, as long as the idling does not create a nuisance.[36]
The limits do not apply when you are stuck in traffic, when the engine is running a power takeoff for refrigeration, a lift gate pump or other auxiliary use, when a passenger vehicle is heating or cooling for its passengers, when a mechanic needs the engine running, or when you are only defrosting the windshield for safety and not as part of a rest period.[36]
HazMat routes and tunnels
FMCSA's hazardous materials route registry document for New Hampshire, dated April 2025, says "No designated or restricted routes as of 03/31/2025."[37] Check the FMCSA hazardous materials route registry by state before you route a load.
Tolls and transponders
NHDOT's Bureau of Turnpikes runs three toll roads: the Blue Star Turnpike (Interstate 95), the Spaulding Turnpike, and the F.E. Everett Turnpike, also called the Central Turnpike.[38] NHDOT says the three toll roads use the E-ZPass system.[39]
- Blue Star Turnpike: 16.2 miles of I-95 from the Massachusetts line in Seabrook to the Maine line in Portsmouth. Both toll plazas are in Hampton, one on the main line and one at Exit 2 for NH 101.[40]
- Central Turnpike: 39.5 miles from the Massachusetts line in Nashua to Exit 14 in Concord, including parts of I-93 and I-293. The plazas are at Hooksett (main line and ramp) and Bedford.[41]
- Spaulding Turnpike: 33.2 miles from Portsmouth to Exit 18 in Milton, with plazas in Dover and Rochester.[42]
The Hampton and Hooksett main line plazas each have two open road tolling lanes in each direction, plus six cash/E-ZPass lanes in each direction.[40][41] NHDOT says it will switch the Dover and Rochester plazas to all-electronic tolling, with no booths and no cash, where the toll is read from an E-ZPass transponder or a photo of the license plate.[43]
NHDOT's rate schedule sets tolls by the number of axles and by single or dual rear tires. On the schedule dated January 1, 2022, a 5-axle truck with dual rear tires pays $5.50 cash at the Hampton main plaza and $3.50 cash at the Hooksett main plaza. With a New Hampshire E-ZPass account those tolls are $4.95 and $3.15. The schedule says an E-ZPass from another state pays the cash rate.[44]
Fuel tax (IFTA)
| IFTA diesel rate, 4th quarter 2026 | $0.222 per gallon. New Hampshire calls its fuel tax the road toll. A June 2014 notice from the state's Road Toll Bureau said the special diesel rate would go to $0.222 per gallon on July 1, 2014.[45][46] |
|---|---|
| Who handles it | The DMV's Motor Carrier Services office handles both IFTA and International Registration Plan (IRP) registration. You file quarterly fuel tax returns with that office.[47] |
| Decals | $10 per qualified vehicle for a set of two decals, one for each side of the vehicle[48] |
IFTA rates can change every quarter. The 4th quarter 2026 matrix was marked not final until December 4, 2026 when this page was checked.
Oversize and overweight permits
You need an NHDOT permit to move a non-divisible vehicle or load that is over the legal weight, width, height or length. The NHDOT Oversize/Overweight Permit Office in Concord issues single trip permits, annual permit supplemental permits and emergency permits through its online system. Call (603) 271-2691 with questions, or start at the NHDOT oversize and overweight permit website.[49][33]
The permit office says a load longer than 110 feet or taller than 13 feet 6 inches needs a route survey. Permit travel is not allowed on holidays or holiday weekends, and a nighttime permit move needs a State Police escort with 48 hours' notice. You cannot combine the Department of Safety's added weight certification with an NHDOT oversize or overweight permit.[33]
Help paying for CDL training in New Hampshire
In New Hampshire, Workforce Innovation and Opportunity Act (WIOA) training help runs through the NH Works offices. New Hampshire Employment Security says WIOA services are available statewide in all 12 NH Works offices, and that the WIOA Adult Program can pay for occupational skills training picked from a catalogue of more than 800 classroom-based trainings. The Adult Program is for New Hampshire residents 18 and older who meet its income and eligibility rules.[50]
Find your nearest office on the New Hampshire Employment Security office locations page.[51] The WIOA Adult Program page has the phone number and email for a career navigator.[50]
Ask three things: whether you qualify for WIOA training funds, which CDL programs in the training catalogue they will pay for, and what paperwork they need before you enroll. Get the answer before you pay a school.
Veterans and military drivers in New Hampshire
New Hampshire military CDL skills test waiver
Federal rules let a state waive the CDL skills test for drivers with military commercial vehicle experience.[52] New Hampshire does. You must be a New Hampshire resident who is serving now or is a veteran within 12 months of an honorable or general discharge. You still have to pass the CDL knowledge tests. You also list all driving offenses from the past two years, and you cannot have any alcohol-related or major driving offense in that time on a civilian or military license.[1]
The application is form DSMV 609, which your commanding officer certifies. It asks whether you drove a military vehicle like the commercial vehicle you plan to drive for at least the two years right before discharge. The form says school bus (S) and passenger (P) endorsements cannot be transferred under the waiver.[53] Bring or mail the completed military test waiver application, form DSMV 609 (PDF) with a copy of your Military Qualification Record and military license. The DMV reviews it and contacts you, and then you can book the knowledge test.[1]
GI Bill and VR&E
If you plan to use VA education benefits, check the school first. The VA's GI Bill Comparison Tool lets you look up schools and training programs.[54] Veterans with a service-connected disability can also ask about Veteran Readiness and Employment (Chapter 31).[55] Ask any school whether it is approved for VA benefits before you enroll.
Behind-the-wheel training in New Hampshire
For a CDL, passenger or school bus endorsement, theory is only half of ELDT. The range and road training has to be done in a truck or bus with a behind-the-wheel provider that is also listed on the Training Provider Registry.[16] The HazMat endorsement is theory only.[56]
To find one near you, use the FMCSA Training Provider Registry provider search: pick the license or endorsement, choose Behind-the-Wheel, and enter your location.[56] You can take theory from one provider and behind-the-wheel from another.
Run a CDL school, fleet or public agency in New Hampshire that does its own behind-the-wheel training? See how to partner with ELDT.Courses for the theory portion.
Check your Training Provider Registry record
When you finish a course, your training provider has until midnight of the second business day to send your completion to the Training Provider Registry.[57]
You can look it up yourself with FMCSA's Check Your Record tool on the Training Provider Registry. Enter your license or permit number and state, your date of birth, and your first and last name exactly as they appear on your license or permit.[58]
New Hampshire CDL questions
How old do you have to be to get a CDL in New Hampshire?
You must be at least 18 to get a New Hampshire commercial driver learner permit. A New Hampshire CDL holder under 21 gets a K restriction, which limits commercial driving to inside the state. You have to be 21 to drive a commercial vehicle across state lines.[4][5][6]
How long do I have to wait after getting my New Hampshire CDL permit to take the road test?
At least 14 days. The DMV says the road test can be scheduled no sooner than 14 days after the commercial driver learner permit is issued. The permit is good for 180 days and can be renewed once.[4]
Where are CDL skills tests given in New Hampshire?
The DMV lists five CDL test sites: Concord, Durham, Lebanon, Nashua and Twin Mountain. You call the DMV at (603) 227-4000 to schedule. If you fail, you have to go to a DMV office in person to schedule a retest, and the fee is $20.[7]
Can I do my ELDT theory online for a New Hampshire CDL?
Yes. ELDT is a federal requirement and New Hampshire follows it. The theory has to come from a provider listed on FMCSA's Training Provider Registry, and the federal definition of theory instruction includes online training. Behind-the-wheel training still has to be done in a vehicle.[1][18][16]
What is the weight limit on posted roads in New Hampshire in the spring?
On a posted section of state highway the limit is 30,000 pounds gross, or 300 pounds for each inch of tire width touching the road, whichever is less. Heating fuel, processed milk, maple sap and septic pumper trucks can be let through with the NHDOT district engineer's approval. Posted roads are listed on New England 511.[34][35]
Trucking guides for states next to New Hampshire
See every state on the Trucking by State page.
Get your ELDT theory done for your New Hampshire CDL.
Online theory courses from an FMCSA-registered provider in Erie, Pennsylvania. Your completion is sent to the Training Provider Registry by midnight of the second business day after you finish.
See All Courses and Prices →Where these facts come from
Every fact on this page comes from an official source that was opened and read on the date shown. Rules, rates and wages change, so check the source before you rely on a number.
- New Hampshire Division of Motor Vehicles. Commercial Driver Licenses. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Commercial Driver's License Manual (version September 9, 2022). Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Commercial Driver's License Manual, Supplement for Modernized Version (version September 9, 2022). Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Commercial Driver Learner Permit. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. License Classifications, Restrictions and Endorsements. Checked October 4, 2026.
- eCFR. 49 CFR 391.11, General qualifications of drivers. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. CDL Road Test. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Licensing Fees. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Licensing Fees. Checked October 5, 2026.
- New Hampshire General Court. RSA 263:42, Driver's License Fees. Checked October 5, 2026.
- New Hampshire Division of Motor Vehicles. CDL Road Test. Checked October 5, 2026.
- New Hampshire Division of Motor Vehicles. Commercial Driver License Application, form DSMV 312 (Rev. 9/24). Checked October 5, 2026.
- New Hampshire Department of Safety (Office of Legislative Services). Saf-C 1800, Commercial Driver Licensing rules. Checked October 5, 2026.
- New Hampshire Division of Motor Vehicles. Commercial Driver Learner Permit. Checked October 5, 2026.
- New Hampshire Division of Motor Vehicles. Commercial Driver Licenses. Checked October 5, 2026.
- eCFR. 49 CFR 380.609, General entry-level driver training requirements. Checked October 4, 2026.
- eCFR. 49 CFR 383.73, State procedures. Checked October 4, 2026.
- eCFR. 49 CFR 380.605, Definitions (theory instruction). Checked October 4, 2026.
- eCFR. 49 CFR 380.603, Applicability (entry-level driver training). Checked October 4, 2026.
- U.S. Bureau of Labor Statistics. Occupational Employment and Wage Statistics, New Hampshire, May 2025. Checked October 4, 2026.
- Projections Central (Projections Managing Partnership). Long-Term Occupational Projections (2024-2034). Checked October 4, 2026.
- New Hampshire General Court. RSA 266:12, Width. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:10, Height. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:11, Length. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:18, Weight on Interstate and Defense Highway System. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:18-a, Weight on Non-Interstate and General Highway System. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:18-b, Weight on Non-Interstate and General Highway System for Vehicles With Additional Registration. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:18-d, Additional Certification and Registration. Checked October 4, 2026.
- New Hampshire General Court. RSA 266:18-c, General Weight Provisions. Checked October 4, 2026.
- eCFR. 23 CFR Part 658, Truck size and weight, route designations (including Appendix C). Checked October 4, 2026.
- New Hampshire General Court. RSA 266:11-b, Triple Trailer Trucks Prohibited. Checked October 4, 2026.
- New Hampshire General Court. RSA 265:60, Basic Rule and Maximum Limits. Checked October 4, 2026.
- New Hampshire Department of Transportation. NHDOT Permits (oversize/overweight permit system). Checked October 4, 2026.
- New Hampshire Department of Transportation. Weight Restrictions - Spring Postings. Checked October 4, 2026.
- New Hampshire General Court. RSA 236:3-a, Exclusion From Seasonal Highway Weight Limit for Certain Vehicles. Checked October 4, 2026.
- New Hampshire Department of Environmental Services, published by the New Hampshire General Court. Chapter Env-A 1100, Prevention, Abatement, and Control of Mobile Source Air Pollution (effective July 1, 2023). Checked October 4, 2026.
- FMCSA. National Hazardous Materials Route Registry: New Hampshire (April 2025). Checked October 4, 2026.
- New Hampshire Department of Transportation. Turnpikes (Bureau of Turnpikes). Checked October 4, 2026.
- New Hampshire Department of Transportation. Highways and Toll Roads. Checked October 4, 2026.
- New Hampshire Department of Transportation. Blue Star Turnpike. Checked October 4, 2026.
- New Hampshire Department of Transportation. Central Turnpike. Checked October 4, 2026.
- New Hampshire Department of Transportation. Spaulding Turnpike. Checked October 4, 2026.
- New Hampshire Department of Transportation. All Electronic Tolling. Checked October 4, 2026.
- New Hampshire Department of Transportation. NH Turnpike System Toll Rate Schedule, effective January 1, 2022. Checked October 4, 2026.
- IFTA, Inc.. IFTA Tax Matrix, 4th Quarter 2026 Fuel Tax Rates. Checked October 4, 2026.
- New Hampshire Department of Safety, Road Toll Bureau (posted by IFTA, Inc.). Notice of New Hampshire Road Toll Rate Change (June 10, 2014). Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Motor Carrier Services. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. International Fuel Tax Agreement (IFTA). Checked October 4, 2026.
- New Hampshire Department of Transportation. Permits (Oversize/Overweight). Checked October 4, 2026.
- New Hampshire Employment Security. WIOA Adult Program. Checked October 4, 2026.
- New Hampshire Employment Security. Office Locations. Checked October 4, 2026.
- eCFR. 49 CFR 383.77, Substitute for knowledge and driving skills tests for drivers with military CMV experience. Checked October 4, 2026.
- New Hampshire Division of Motor Vehicles. Application for Military Test Waiver (form DSMV 609). Checked October 4, 2026.
- U.S. Department of Veterans Affairs. GI Bill Comparison Tool. Checked October 4, 2026.
- U.S. Department of Veterans Affairs. Veteran Readiness and Employment (Chapter 31). Checked October 4, 2026.
- FMCSA. Training Provider Registry: Find a Provider. Checked October 4, 2026.
- eCFR. 49 CFR 380.717, Training certification. Checked October 4, 2026.
- FMCSA. Training Provider Registry: Check Your Record. Checked October 4, 2026.
Last verified: . This page is general information, not legal advice. See something out of date? Tell us through the contact page.